| Feature: | Biodegradable |
|---|---|
| Material: | General Purpose Polystyrene/GPPS, High Density Polyethylene/HDPE |
| Usage: | General Plastics, General Plastics |
| Plastic Properties After Heated: | Thermoplastic Plastics, Thermosetting Plastic |
| Plastic Forming Method: | Injection |
| Color: | White, White |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Properties:
High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance cloths also is good.
Injection Grade:
| Properties | Unit | Test method |
| Melt flow rate | g/10min | 2.2 - 18 |
| Density | g/cm3 | 0.953 |
| Tensile Strength at Yield | Mpa | 22 - 28 |
| Elongation at Break | % | 40 - 600 |
Film Grade:
| Properties | Unit | Test method |
| Melt flow rate | g/10min | 11.0 |
| Density | g/cm3 | 0.95 |
| Tensile Strength at Yield | Mpa | 23 |
| Elongation at Break | % | 600 |
| Fish eye max(0.3-2mm) | 0.4mm /1520cm 2 | 15 |
Suppliers with verified business licenses
){kind=link}
){kind=link}