Virgin HDPE Polyethylene Granules for Film Shopping Bags

• Customization: Available
• CAS No.: 9002-88-4
• Material: Polyethylene/PE
• Usage: General Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Injection
• Color: White
• Transport Package: 25kg/Bag, 20ton /Container
• Origin: China
• HS Code: 3901200090
• Production Capacity: 5000ton

Product Description

Virgin HDPE polyethylene granules for film shopping bags

1.Introduction
HDPE has several properties that make it ideal as a packaging and manufacturing product. It's stronger than standard polyethylene, acts as an effective barrier against moisture and remains solid at room temperature. It resists insects, rot and other chemicals. It is easily recyclable and can be used again and again. Recycled HDPE creates no harmful emissions during its production or during its use by the consumer.  Also, HDPE leaks no toxic chemicals into the soil or water.
 
HDPE is one of the most commonly used plastics in the world. It is typically found in milk jugs, plastic bags and refillable plastic bottles. In addition to plastic lumber and recycled plastic furniture, recycled HDPE is used to manufacture lawn and garden products, buckets, crates, office products and automobile parts.
 
2.Grade
HDPE pipe grade can be used in the production of pressure pipes, such as pressurized water pipes, fuel gas pipelines and other industrial pipes. 
HDPE Injection grade, red, blue, green, 
HDPE Blow grade, white, grey, black 
HDPE Pipe Grade black pellet 
HDPE coating grade
And So On
 
3.Specification

HDPE cable material Property		Typical Value
Mass density  g/cm 3		0.941-0.959
Melt flow Rate(190 centidegree /2.16kg)g/10min		≤1.0
Tensile yield strength  MPa		≥19.0
Flexural modulus  Mpa		≥965
Elongation@ break %		≥400
Impact Embrittlement temperature centidegree		MAX -118
Dielectric Constant	100KHZ	2.32
	1MHZ	2.31
Loss Tangent	100KHZ	MAX 0.0001
	1MHZ	MAX 0.0001
Volume resistivity OHM-CM		MIN 1x10 15

 

4.General Application:

1.Injection product: the turnover box, bottle caps, barrel class, hats, food containers, plate, 
dustbin, box etc

2.Blow molding products: hollow molding products, such as various series blow molding barrel,
 containers, bottles of class, cosmetics,the petrol tank, daily product, etc

3.Blow film product:Foodstuff packing bag,groceries shopping bags, chemical fertilizer lined with film, etc

4.Extruded product: Pipe,tube mainly used in gas transportation, public water and chemicals transport, such
 as building materials, gas pipe, hot water drain pipe etc: sheet material is mainly used in the seat, suitcase,
 handling containers.etc
 

No.	Grade	Type	MFR ( g/10min )	Tensile Strength MPa	Elongation At Break (%)	Environmental stress-cracking
1	5000S	Extrusion	0.9	23	800
2	5200B	Blow Molding	0.35	23	800	25
3	2200J	Injection Molding	5.5	23	180
4	3000J/JE	Injection Molding	2.3	26	400
5	6100M	Extrusion	0.13	18
6	1500J	Injection Molding	20	28	40
7	6600B	Blow Molding	0.35	23	500	100
8	6360M	Extrusion	0.22	24	600	1000
9	6380M	Extrusion	0.1	22	600	1500
10	7000F	Extrusion	0.042	24	450	300
11	2100J	Extrusion	6.5	20
12	1600J	Extrusion	18	25	40
13	7600M	Extrusion	0.04	22	600	10000
14	7800M	Extrusion	0.04	26	600	500
15	5300B	Blow Molding	0.4	23.5	480	600
16	2300XM	Extrusion	5.5	22	400	400
17	8200B	Blow Molding	0.03	25	500	600
18	8300B	Blow Molding	0.021	24	500	550
19	7300M	Extrusion	0.07	22	500	500